I have a 3D-printer at homecould one of you make a 3D modal of this for me Please
5,5 CM tall2 CM diameter (6 points on the crown)p.s. in one sulide color
Thank you
7956788I do 3D modeling.
If you can wait about 2 weeks, I can try my hand at this.
79568212 weeks...ok...
any Questions ?
7956895Have you used to w 3D printer before, or is this your first time?
7957096Well it's my brother's
but we have used it before
Why ?
7957096so next week you'll get started ?
7959937Yeah, just remind me with a PM.
Also, ask your brother if there's like, any requirements for the model before it's acceptable for 3D printing
7960469
Faut que ça soit simple et que au moins un des cotés soit plat et à son plus large à la base
It has to be simple and at least one side must be flat and widest at the base.
p.s. it's in one sulide color
7960469So... any Questions ?
5,5 CM tall2 CM diameter(6 points on the crown)p.s. in one sulide color
7962647Ah wait, it has a crown on the top? I thought it was just a regular pawn
7962970No... if it was a regular pawnI would have easterly found it online
p.s. what did you think
(6 points on the crown)
meant ?
EDIT: for get itI did my own
https://cdn.discordapp.com/attachments/1070167436214673499/1235241973569556610/image.png?ex=6634f9bc&is=6633a83c&hm=9f36445493ed7efe6f9d320f53d54ab58f9fc641eaa63efc45c47b1c616c4b94&
https://cdn.discordapp.com/attachments/1070167436214673499/1235241974211018845/image.png?ex=6634f9bc&is=6633a83c&hm=6fbc37304e42d58d3ab7a9586e0e31498f672756f8b6f4c68597a0a98f5495e4&
I have a 3D-printer at home
could one of you make a 3D modal of this for me
Please
5,5 CM tall
2 CM diameter
(6 points on the crown)
p.s. in one sulide color
Thank you
7956788
I do 3D modeling.
If you can wait about 2 weeks, I can try my hand at this.
7956821
2 weeks...
ok...
any Questions ?
7956895
Have you used to w 3D printer before, or is this your first time?
7957096
Well it's my brother's
but we have used it before
Why ?
7957096
so next week you'll get started ?
7959937
Yeah, just remind me with a PM.
Also, ask your brother if there's like, any requirements for the model before it's acceptable for 3D printing
7960469
p.s. it's in one sulide color
7960469
So... any Questions ?
5,5 CM tall
2 CM diameter
(6 points on the crown)
p.s. in one sulide color
7962647
Ah wait, it has a crown on the top? I thought it was just a regular pawn
7962970
No... if it was a regular pawn
I would have easterly found it online
p.s. what did you think
meant ?
EDIT: for get it
I did my own
https://cdn.discordapp.com/attachments/1070167436214673499/1235241973569556610/image.png?ex=6634f9bc&is=6633a83c&hm=9f36445493ed7efe6f9d320f53d54ab58f9fc641eaa63efc45c47b1c616c4b94&
https://cdn.discordapp.com/attachments/1070167436214673499/1235241974211018845/image.png?ex=6634f9bc&is=6633a83c&hm=6fbc37304e42d58d3ab7a9586e0e31498f672756f8b6f4c68597a0a98f5495e4&