POD Press Progress · 4:40am Nov 24th, 2017
Saddle Stapler Project!!
The loose wooden block that the stapler is on will be a platform mounted to the upright on the right.
I will cut the stapler’s base off about at the hole on the right in its base. The little staple folding anvil will be cut to a narrow strip and mounted to the middle of the saddle ridge. The stapler will get mounted to the platform so that it will line up with the anvil on the ridge.
A folded book will go on the saddle and the stapler will always hit the spine of the book with this setup.
The whole thing needs to be epoxied together and some bracing put in to reinforce some joints.
With drying times for glue and some varnish, I expect to have it ready in 2 or 3 days.