Wood Eastern Walnut Wooden aluminum composite material

Saving energy is very important for both people and the environment. As a family, can save money on electricity bills is a great way of saving. Instead of spending more money on Wood Eastern Walnut Wooden aluminum composite material, they can be saved for emergencies. Energy savings can also protect the environment. No damage done when electricity is produced on a number of power plants. Even use less power can do a tremendous job of saving the environment.

But if we have to use less power, how we might be able to use various electrical appliances? The answer to that is a Wood Eastern Walnut Wooden aluminum composite material of solar energy. But it can buy quite expensive, so the best way is to do it alone. How to do it? With items that you can easily find in your home or the local hardware store near you, now you can make a panel of solar energy to help to go green and saving. Here are the steps how to make a Wood Eastern Walnut Wooden aluminum composite material of solar energy and the things you will need:

Electric motor
Sheet metal shears
A micro-ammeter that can read between the lines of 10-50 microamperes
1/2 ft. A sheet of copper flashing
Two characters Crocodile Clip
One 2-liter plastic bottles / glass jars
Safety glasses
Machine water
2-3 tablespoons salt
Electric drill sand paper

1. Use sandpaper to remove the signs of corrosion on copper flashing and clean Wood Eastern Walnut Wooden aluminum composite material thoroughly. Then, with metal scissors, cut it so that it will fit the burners.

2. Place the blinking on the recorder and cook for at least 30 minutes to produce cupric oxide black thick enough.

3. When a cupric oxide coating has good form, let cool until it flakes off.

4. Clean the copper cooled under running water but do it slowly to the type of oxide copper red that has formed in the heat will not go away.

5. Cut a copper flashing the same size as before. With alligator clips, attach two sheets that you created in the glass jar with the expansion or a plastic bottle with the cutting head. The plates are not touching each other and bend the shape of the glass jar or bottle.

6. Links alligator clip is first attached to the flashing affect the positive side of the clock. Other clips Wood Eastern Walnut Wooden aluminum composite material with copper oxide should be linked to the negative side.

7. Make a solution of salt and water. Implement a solution that could fully soak the base of the plate. The clip should be high and dry.

8. Put it in the sun and see how it can make the jump gauge. Then you can use it to help power the various devices.