650nm Red Cross Line Laser Module Used for Car Wheel Alignment · 11:16am January 15th
When a high brightness and high straightness device of a 650nm red cross line laser module is applied for those of industrial machinery processing works, it is also playing an import part for modern time lase car wheel alignment system. Only according to its easy installation onto wheel alignment equipment or device, together with a highly fine and straight two perpendicular red lines reference, it can help worker or engineers a lot of for car repair, installation and operation etc.
After quite easy use of an AC/DC adapter, this 650nm red cross line laser module is making continuous red laser beam emission, and converts into highly clear two perpendicular red lines with accurate 90 degrees. According to its proper installation on the wheel alignment equipment, the red cross line source projected by the module can accurately indicate the center position of the wheel and the longitudinal and lateral reference lines of the vehicle. The operator adjusts the angle of the wheel according to the relative position relationship between these red cross line sources and the vehicle-specific marks or measuring instruments, so that the wheel reaches the correct positioning parameters.
Owing to the use of a qualified glass coated lens inside a high duration anodized aluminum alloy housing tube, this 650nm red cross line laser module enables freely selected fan angles of 10, 15 and 110 degree. It generates different dimension and high linear quality red cross line source, which just making good job for improving positioning accuracy. Compared with traditional wheel alignment methods, the cross laser alignment tool does not require complex measurements and calculations. The operator can directly adjust according to the instructions of red cross line source, shortening the positioning time and improving work efficiency.
Being made with ultra compact size tube design, even though operators are not skilled users, they can still understand and master the wheel alignment operation method based on this 650nm red cross line laser module. It gets low rely on any manual force input, thus it is reducing the requirements for the operator's skill level. Either it is used for automobile manufacturing plant or automobile repair shop, with the assistance of red cross line source, this red alignment laser can help them to make quick and accurate maintenance, wheel assemble, wheel positioning work effectively. Further more, when it is operating with higher power up to 50mW to 100mW for longer distance wheel positioning, it is a key issue to avoid thermal energy hurt to eyes and wear correct laser safety goggles, thus it can assures high efficiency alignment for all working occasions effectively.
